Direct Driven Fixed Speed Compressor With High Performance Punching
Magnetic steel
- Punching uses high-performance low-loss silicon, we conduct simulation analysis of mechanical strength with finite element method so as to make rotator inertia reach the minimum on the condition that enough mechanical rigidity and mechanical strength.
- Rotator magnetic steel adopts high-performance NdFeB permanent magnetic material to form sine wave air-gap field
- Axial flow uses the processing method of embedded bond, which simultaneously meets requirements of optical axis and bond axis.
Winding
- Punching uses high-performance low-consumption silicon steel sheet;
- Insulation grade of enameled wire is grade C and integral insulation is grade F
- Shell uses high-intensity aluminum profile shell, appe final optimization through finite element temperature gradient and good heat dissipation effect;
Detailed Product Specifications:
| Model |
WZS-15AZ |
| Air Flow/Working pressure |
1.7m3/min @ 7bar |
| 1.6m3/min @ 8bar |
| 1.4m3/min @ 10bar |
| 1.2m3/min @ 12.5bar |
| Compression stage |
Single |
| Type of Cooling |
Air Cooling |
| Exhaust Temperature |
< ambient temperature+8 degrees |
| Oil content of discharged air |
<2ppm |
| Noise |
70±2 dB(A) |
| Power |
380VAC/3phase/50Hz (Adjustable) |
| Starting way |
Soft VSD start |
| Driven method |
Direct-driven |
| Motor power |
11kw/15hp |
| Dimension |
1040*800*1180mm |
| Weight |
400kg |
| WZS- |
10AZ |
15AZ |
20AZ |
25AZ |
30AZ |
50AZ |
75AZ |
100AZ |
125AZ |
| Air flow/pressure (m³/min/MPa) |
1.2/0.7 |
1.7/0.7 |
2.4/0.7 |
3.1/0.7 |
3.8/0.7 |
6.4/0.7 |
10.5/0.7 |
13.6/0.7 |
16.3/0.7 |
| 1.1/0.8 |
1.6/0.8 |
2.2/0.8 |
2.9/0.8 |
3.5/0.8 |
6.1/0.8 |
9.8/0.8 |
13.3/0.8 |
15.0/0.8 |
| 0.95/1.0 |
1.4/1.0 |
2.0/1.0 |
2.7/1.0 |
3.2/1.0 |
5.7/1.0 |
8.7/1.0 |
11.6/1.0 |
14.6/1.0 |
| 0.8/1.25 |
1.2/1.25 |
1.7/1.25 |
2.2/1.25 |
2.9/1.25 |
5.1/1.25 |
7.5/1.25 |
9.8/1.25 |
12.3/1.25 |
| Motor |
Power (kw) |
7.5 |
11 |
15 |
18.5 |
22 |
37 |
55 |
75 |
90 |
| Horse power (HP) |
10 |
15 |
20 |
25 |
30 |
50 |
75 |
100 |
125 |
| Dimension |
Length(mm) |
1000 |
1040 |
1040 |
1100 |
1400 |
1600 |
2050 |
2050 |
2150 |
| Width (mm) |
600 |
800 |
800 |
850 |
850 |
1000 |
1200 |
1200 |
1300 |
| Height (mm) |
1000 |
1180 |
1180 |
1300 |
1150 |
1370 |
1500 |
1500 |
1700 |
| Noise dB(A) |
66±2 |
70±2 |
70±2 |
70±2 |
71±2 |
74±2 |
74±2 |
75±2 |
75±2 |
| Outlet diameter |
G3/4 |
G3/4 |
G3/4 |
G11/4 |
G11/4 |
G11/2 |
G2 |
G2 |
G2 |
| Weight (kg) |
240 |
400 |
410 |
590 |
620 |
840 |
1735 |
1850 |
1920 |
| WZS- |
150AZ/W |
180AZ/W |
220AZ/W |
250AZ/W |
300AZ/W |
340AZ/W |
400AZ/W |
480AZ/W |
540AZ/W |
| Air flow/pressure (m³/min/MPa) |
20.3/0.7 |
24.0/0.7 |
27.0/0.7 |
32.5/0.7 |
40.0/0.7 |
43.5/0.7 |
50.8/0.7 |
60.0/0.7 |
72.0/0.7 |
| 19.0/0.8 |
23.0/0.8 |
26.5/0.8 |
31.0/0.8 |
36.8/0.8 |
42.0/0.8 |
48.2/0.8 |
57.0/0.8 |
68.0/0.8 |
| 17.0/1.0 |
20.0/1.0 |
22.5/1.0 |
28.0/1.0 |
32.2/1.0 |
38.8/1.0 |
42.6/1.0 |
50.0/1.0 |
60.5/1.0 |
| 14.6/1.25 |
18.0/1.25 |
20.1/1.25 |
25.1/1.25 |
28.5/1.25 |
34.6/1.25 |
39.8/1.25 |
45.0/1.25 |
50.5/1.25 |
| Motor |
Power (kw) |
110 |
132 |
160 |
185 |
220 |
250 |
300 |
350 |
400 |
| Horse power (HP) |
150 |
180 |
220 |
250 |
300 |
340 |
400 |
480 |
540 |
| Dimension |
Length(mm) |
2800 |
2800 |
2800 |
2800 |
2900 |
2900 |
4200 |
4200 |
4200 |
| Width (mm) |
1650 |
1650 |
1650 |
1650 |
1860 |
1860 |
2200 |
2200 |
2200 |
| Height (mm) |
1850 |
1850 |
1850 |
1850 |
2000 |
2000 |
2150 |
2150 |
2150 |
| Noise dB(A) |
75±2 |
75±2 |
75±2 |
78±2 |
78±2 |
78±2 |
80±2 |
82±2 |
83±2 |
| Outlet diameter |
DN65 |
DN65 |
DN80 |
DN80 |
DN100 |
DN100 |
DN125 |
DN125 |
DN150 |
| Weight (kg) |
3030 |
3130 |
3210 |
3470 |
4500 |
4600 |
7000 |
7500 |
8100 |
Localized timely and convenient service
Whole set of station building consultation of newly built air compressor station.
After equipment is installed, we will assign specialized personnel to take charge of equipment debugging and training of management personnel about operational maintenance. After equipment is qualified through debugging, we provide maintenance and accessories for free within term of quality guarantee.
We provide lifelong service for host machine and guaranteed accessory supply.
We will pay regular visit to customers every year.
For occasional fault from customers, we will assign personnel to do rapid fault removal.
Advanced detecting instrument timely provides operation data.
The system has air use data collection, analysis and optimization of air source management.
For customers having special requirements, we can also dispatch commissioner team to user* s site through the year to conduct 24h follow-up service, fixed-point on-site inspection and maintenance, and take regular maintenance measures and do on-site repair whenever and wherever possible.
We provide customers with optimal service scheme to reduce maintenance cost of customers.
